Si-TPV 2150-35A Soft-Touch Thermoplastic Elastomer don Abubuwan da ake sakawa a jiki
bayyana:
SILIKE Si-TPV 2150-35A thermoplastic elastomer wani elastomer ne mai ƙarfi wanda aka yi da silicone mai ƙarfi wanda aka yi shi ta hanyar fasaha mai jituwa ta musamman don taimakawa robar silicone da aka watsa a cikin TPO daidai gwargwado azaman barbashi na micron 2 ~ 3 a ƙarƙashin na'urar hangen nesa. Waɗannan kayan na musamman sun haɗa ƙarfi, tauri da juriyar gogewa na kowane elastomer mai yanayin zafi tare da kyawawan halaye na silicone: laushi, jin siliki, hasken UV da juriyar sinadarai waɗanda za a iya sake amfani da su kuma a sake amfani da su a cikin hanyoyin masana'antu na gargajiya.
AIKA MANA DA IMEL Aikace-aikace
Si-TPV 2150-35A dynamic vulcanized thermoplastic silicone-based elastomer na iya yin mu'amala mai kyau da TPE da makamantansu na polar substrates kamar PP, PA, PE, PS, da sauransu... Samfuri ne da aka ƙera don yin molding mai laushi akan na'urorin lantarki masu sawa, akwatunan haɗi don na'urorin lantarki, motoci, manyan masana'antun waya na TPE, da wayoyin TPE .....
Muhimman Fa'idodi
- 1. Samar da fuskar da ta musamman mai laushi da laushi, mai sauƙin shafawa da kuma laushin hannu, tare da kyawawan halaye na injiniya.
- 2. Ba ya ƙunshe da man shafawa mai laushi da na roba, babu zubar jini / haɗarin mannewa, babu wari.
- 3. Tsaftacewar UV da juriya ga sinadarai tare da kyakkyawan haɗin kai ga TPE da makamantan abubuwan da ke kewaye da polar.
- 4. Rage shaƙar ƙura, juriya ga mai da kuma rage gurɓata.
- 5. Mai sauƙin cirewa, kuma mai sauƙin sarrafawa.
- 6. Juriyar abrasion mai ɗorewa & juriyar murƙushewa & juriyar karce.
- 7. Kyakkyawan sassauci da juriya ga kink.
Halaye
- Daidaitawa: SEBS, PP, PE, PS, PET, PC, PMMA, PA
Al'adar injina ta yau da kullun
| Ƙarawa a Hutu | 541% | ISO 37 |
| Ƙarfin Taurin Kai | 2.53 Mpa | ISO 37 |
| Bakin Teku A Taurin | 34 | ISO 48-4 |
| Yawan yawa | 1.03g/cm3 | ISO1183 |
| Ƙarfin Yagewa | 17.27 kN/m | ISO 34-1 |
| Modulus na Ragewa | 1.06 Mpa | |
| MI(190℃,10KG) | 4.5 | |
| Zafin Narkewa Mafi Kyau | 220 ℃ | |
| Mafi kyawun Zafin Mold | 25 ℃ | |
Yadda ake amfani da shi
● Yin allura kai tsaye.
● Jagorar Sarrafa Alluran Motsa Jiki
| Lokacin Busarwa | Awa 2-4 |
| Zafin Busarwa | 60-80℃ |
| Zafin Yankin Ciyarwa | 180-190℃ |
| Zafin Jiki na Tsakiyar Yankin | 190-200℃ |
| Zafin Jiki na Gaba | 200-220℃ |
| Zafin Bututun | 210-230℃ |
| Zafin Narkewa | 220℃ |
| Zafin Mold | 20-40℃ |
| Gudun Allura | Matsakaicin matsakaici |
Waɗannan yanayin tsari na iya bambanta da kayan aiki da hanyoyin aiki daban-daban.
● Sarrafawa na Biyu
A matsayin kayan thermoplastic, ana iya sarrafa kayan Si-TPV na biyu don samfuran yau da kullun
● Matsi na Gyaran Allura
Matsin riƙewa ya dogara ne da yanayin, kauri da wurin ƙofar samfurin. Ya kamata a saita matsin riƙewa zuwa ƙaramin ƙima da farko, sannan a hankali a ƙara har sai babu wata matsala da ta shafi hakan a cikin samfurin da aka yi wa allura. Saboda halayen roba na kayan, matsin riƙewa mai yawa na iya haifar da mummunan lalacewar ɓangaren ƙofar samfurin.
● Matsi na baya
Ana ba da shawarar cewa matsin lamba na baya lokacin da aka ja da baya ya kamata ya zama 0.7-1.4Mpa, wanda ba wai kawai zai tabbatar da daidaiton narkewar narkewa ba, har ma zai tabbatar da cewa kayan ba su lalace sosai ta hanyar yankewa. Saurin sukurori da aka ba da shawarar Si-TPV shine 100-150rpm don tabbatar da cikakken narkewa da plasticization na kayan ba tare da lalata kayan da dumamar yanke ke haifarwa ba.
Bayani:
1. Ana iya ƙera samfuran Si-TPV elastomer ta amfani da hanyoyin kera thermoplastic na yau da kullun, gami da yin molding fiye da kima ko yin molding tare da substrates na filastik kamar PP, PA.
2. Jin siliki sosai na Si-TPV elastomer baya buƙatar ƙarin matakai na sarrafawa ko rufewa.
3. Yanayin aikin na iya bambanta dangane da kayan aiki da hanyoyin aiki daban-daban.
4. Ana ba da shawarar busar da danshi mai bushewa da bushewa ga duk busarwa.
Kunshin:
25KG / jaka, jakar takarda mai sana'a tare da jakar ciki ta PE.
Rayuwar shiryayye da ajiya:
A kai shi a matsayin sinadari mara haɗari. A adana a wuri mai sanyi da iska mai kyau.
Halayen asali za su kasance ba tare da matsala ba na tsawon watanni 12 daga ranar samarwa idan aka ajiye su a cikin ajiyar da aka ba da shawarar.
Maganin da ke da alaƙa?
-
Elastomer mara mannewa na Thermoplastic don Kayan Wasanni na Cikin Gida, Waje & Na Nishaɗi
Si-TPV don kayan wasanni da kayan wasanni fiye da kima zai ƙara "jin" da ya dace ga samfurinka. Waɗannan kayan masu kayatarwa suna magance matsalolinka mafi wahala kuma suna ba da damar ƙirƙirar ƙirar samfura don haɗa aminci, kyau, aikin samfura, a fannin daidaitawa, da kuma dacewa da muhalli.
-
Maganin Elastomer Mai Taushi na Overmold don Riƙewa Mai Dorewa da Kayan Aikin Hannun
Lokacin amfani da Si-TPV, ƙira da haɓaka maƙallan hannu don kayan aiki masu ƙarfi da marasa ƙarfi da samfuran hannu, ba wai kawai yana ƙara kyawun na'urar ba, yana ƙara launi ko laushi mai bambanci. Musamman ma, aikin Si-TPV mai sauƙi yana haɓaka ergonomics, yana rage girgiza, kuma yana inganta riƙewa da jin daɗin na'urar.
-
Si-TPV Soft-Touch Elastomer don Kayan Wasan Yara, Kayayyakin Dabbobi, da Saƙar Rufi
Idan aka kwatanta da PVC, mafi yawan TPU mai laushi, da TPE, Si-TPV ba ya ɗauke da robobi ko mai laushi. Mafita masu kyau a gare ku! kyau, masu dacewa da fata, muhalli, taɓawa mai laushi da aka yi wa ado da yawa, da sauƙin launi akan kayan wasa da kayayyakin masarufi. Kada ku ƙunshi wani abu mai haɗari yayin da kuke ba da ƙarfi mai ƙarfi daga juriya ga gogewa da tabo.
-
Maganin Elastomer Mai Taushi Mai Kyau ga Lafiyar Dan Adam da Yara
Madadin PVC da silicone ko robobi na gargajiya masu dacewa da muhalli -- Jerin Si-TPV, wanda ke ba masana'antun damar ƙirƙirar samfura na musamman, waɗanda suke da kyau a gani, a cikin kyau, kwanciyar hankali, ergonomic, da launuka masu haske, tunda ba tare da ƙaura ba, suna da saman da ba ya mannewa, don haka yana da juriya ga ƙwayoyin cuta, datti, da sauran gurɓatattun abubuwa fiye da sauran kayan. Wannan ya sa ya zama sabon mafita ga samfuran yara na uwaye da jarirai.
-
Mai Gyaran Si-TPV Polymer don Ingantaccen Dorewa & TPU Mai Taɓawa Mai Taɓawa a cikin Kebul ɗin Cajin EV da Tiyo
SILIKE Si-TPV 3100 Series wani elastomer ne mai ƙarfi wanda aka yi da silicone wanda ke aiki azaman ƙari na filastik da kuma mai gyara polymer don tsarin TPU. Yana haɓaka aikin TPU ta hanyar samar da juriya ga karce, juriyar gogewa, da kuma halayen da ba sa mannewa. Bugu da ƙari, yana inganta jin daɗin taɓawa mai laushi kuma yana ba da ƙarewa mai laushi, yana sa TPU ta fi dacewa da aikace-aikace kamar bututun shawa mai sassauƙa, sassan motoci, da kebul na caji na EV. Wannan mai gyara yana bawa masana'antun damar cimma kyawun gani da aiki, yana haɓaka juriya da kwanciyar hankali na kayan aiki masu sassauƙa.
-
Masu Gyaran Si-TPV don Inganta Santsi da Dorewa a Fuskar TPE
Sabuwar hanya ce ga na'urorin lantarki masu amfani da thermoplastic. Si-TPV sabuwar na'ura ce ta gyaran TPE, wacce aka ƙera don inganta santsi a saman, jin tabo, da kuma juriya gaba ɗaya. Idan aka haɗa ta da TPE, Si-TPV yana ƙara juriyar kayan ga karce da gogewa, yayin da yake rage tauri ba tare da lalata halayen injiniya ba. Sakamakon shine saman da ke da laushi tare da juriyar tsufa mai kyau, juriyar rawaya, da juriyar tabo. Bugu da ƙari, Si-TPV yana ba da gudummawa ga ƙarewar saman matte, wanda hakan ya sa ya zama mafita mafi kyau ga masana'antu da ke buƙatar na'urorin lantarki masu aiki da inganci tare da fa'idodi na aiki da kyau.
-
Kirkire-kirkire a Kayan Kumfa na EVA: Si-TPV Mai Gyara don Inganta Aiki da Dorewa
An shigar da Si-TPV cikin kayan kumfa na EVA, kuma an yi amfani da fasahar kumfa mai sinadarai don shirya kayan kumfa na EVA tare da fa'idodin kariyar muhalli da cika launi. Idan aka kwatanta da OBC da sauran polyolefin elastomers, Si-TPV ya fi tasiri, kuma a lokaci guda yana iya inganta yanayin matsewa mai ƙarfi da ƙarancin zafin jiki na kayan kumfa na EVA, kuma ƙimar raguwar zafi na kayan kumfa na EVA ya ragu daga 1.5% zuwa 0.4%.
-
Barbashi Masu Taushi da Aka Gyara don Matte Fim da Fata
SILIKE's Soft TPU Modifier Barbashi suna haɗa juriya da sassauci, wanda hakan ya sa suka dace da amfani a cikin kayan wasanni kamar ƙwallon baseball, ƙwallon softball, da safar hannu ta golf, da kuma a cikin fina-finai da fata. Waɗannan barbashi suna inganta jin daɗin hannu ba tare da ɓatar da jin daɗi ko ƙwarewa ba, suna da laushi mai jure zamewa, wanda ba ya mannewa wanda ke haɓaka iko a cikin yanayin danshi ko santsi. Tare da ƙimar COF > 3, suna ba da riƙo mai kyau. Bugu da ƙari, suna aiki azaman ƙarin matte mai aiki ga TPU, suna inganta kyawun gani, yanayin saman, da juriya ba tare da buƙatar granulation ko hazo ba.
-
Kayayyaki masu laushi, masu dacewa da fata don Kayayyakin Lantarki na 3C
Si-TPV elastomer ne mai laushi da laushi, wanda ba shi da phthalate, wanda ke ba da laushin taɓawa, juriya, da kuma dacewa da mold fiye da kima - wanda ya dace da kayan lantarki na 3C masu dorewa kamar akwatunan waya, madauri, da kayan da ake sawa.