SILIKE Si-TPV
bayyana:
SILIKE Si-TPV wani ƙwaƙƙwaran vulcanizated thermoplastic Silicone-based elastomers wanda aka yi ta hanyar fasaha ta musamman mai dacewa, yana taimakawa roba siliki da aka tarwatsa a cikin TPU a ko'ina a matsayin 2 ~ 3 micron droplets a karkashin na'urar hangen nesa.
Aiko MANA Imel Fa'idodin wristband wanda Si-TPV 3100-65A yayi
1. Silky, Friendly-skin touch, dace da yara kuma
2. Kyakkyawan aikin encapsultaion
3. Kyakkyawan aikin rini
4. Kyakkyawan aikin saki da sauƙi don sarrafawa
Fasaloli & Fa'idodi
- Samar da saman tare da taɓawa na musamman na siliki da fata, mai taushin hannu tare da kayan aikin injiniya mai kyau.
- Ba ya ƙunshi mai filastik da mai laushi, babu haɗarin zubar jini / m, babu wari.
- Bargarin UV da juriya na sinadarai tare da ingantacciyar haɗin gwiwa zuwa TPU da makamantan iyakacin iyaka.
- Rage tallan ƙura, juriyar mai da ƙarancin ƙazanta.
- Sauƙi don nunawa, kuma mai sauƙin ɗauka.
- Juriya mai ɗorewa & juriya na murkushewa.
- Kyakkyawan sassauci da juriya na kink.
Bayani
SILIKE Si-TPV wani ƙwaƙƙwaran vulcanizated thermoplastic Silicone-based elastomers wanda aka yi ta hanyar fasaha ta musamman mai dacewa, yana taimakawa roba siliki da aka tarwatsa a cikin TPU a ko'ina a matsayin 2 ~ 3 micron droplets a karkashin na'urar hangen nesa. Wannan abu na musamman yana ba da kyakkyawar haɗuwa da kaddarorin da fa'idodi daga thermoplastics da cikakken ƙetaren silicone roba. Ya dace da saman na'urar da za a iya sawa, ƙwanƙwasa waya, na'urorin haɗi na na'urorin lantarki (misali belun kunne, misali), overmolding, fata na wucin gadi, Mota, TPE mai girma, masana'antar TPU….
3300 jerin ---Antibacterial
| Gwaji abu | 3300-65A | 3300-75A | 3300-85A |
| Modulus of Elasticity ( Mpa ) | 3.84 | 6.17 | 7.34 |
| Tsawaitawa a lokacin hutu (%) | 515 | 334 | 386 |
| Ƙarfin ƙarfi (Mpa) | 9.19 | 8.20 | 10.82 |
| Hardness ( Shore A ) | 65 | 77 | 81 |
| Yawan yawa (g/cm3) | 120 | 1.22 | 1.22 |
| MI (190 ℃, 10KG) | 37 | 19 | 29 |
Alama: Bayanan da ke sama ana amfani da su ne kawai azaman fihirisar samfur na yau da kullun, ba azaman fihirisar fasaha ba
Yadda ake amfani da shi
1. Gyaran allura kai tsaye.
2. Mix SILIKE Si-TPV® 3100-65A da TPU a wani kaso, sannan extrusion ko allura.
3. Ana iya sarrafa shi tare da la'akari da yanayin aiki na TPU, bayar da shawarar zafin aiki shine 160 ~ 180 ℃.
Magana
Yanayin tsari na iya bambanta tare da kowane kayan aiki da matakai.
Ana ba da shawarar bushewa mai cire humidist don duk bushewa.
Bangaren shuɗi shine lokacin kwarara TPU, wanda ke ba da kyawawan kaddarorin inji.
The kore part ne silicone roba barbashi samar da silky fata-friendly taba, high da low-zazzabi juriya, weather juriya, tabo juriya, da dai sauransu.
Bangaren baƙar fata wani abu ne na musamman wanda ya dace da shi, wanda ke inganta daidaituwa na TPU da silicone rubber, ya haɗu da kyawawan kaddarorin biyu, kuma yana shawo kan gazawar abu ɗaya.
Kunshin
25KG/jakar, jakar takarda ta fasaha tare da jakar ciki ta PE.
Rayuwar tanadi da ajiya
Kai sufuri a matsayin sinadari mara haɗari. Ajiye a wuri mai sanyi, da iska mai kyau.
Halayen asali sun kasance cikakke har tsawon watanni 12 daga ranar samarwa, idan an adana su a cikin ajiyar shawarar.
Magani masu dangantaka?