Si-TPV 3520-60A Elastomer Mai Juriya Ga Abrasion don Taɓawa Mai Taɓawa Mai Laushi a Wasanni & Kayan Waje
bayyana:
SILIKE Si-TPV 3520-60A thermoplastic elastomer wani elastomer ne mai ƙarfi wanda aka yi da silicone mai ƙarfi wanda aka yi ta amfani da fasaha ta musamman mai jituwa wanda ke tabbatar da cewa robar silicone ta warwatse daidai a cikin TPU a matsayin ƙwayoyin micron 2-3 a ƙarƙashin na'urar hangen nesa. Waɗannan kayan na musamman sun haɗa ƙarfi, tauri, da juriyar gogewa na elastomers masu ƙarfin thermoplastic tare da kyawawan halaye na silicone: laushi, jin siliki, juriyar hasken UV, da juriyar sinadarai, yayin da ake iya sake amfani da su kuma ana iya sake amfani da su a cikin hanyoyin masana'antu na gargajiya.
AIKA MANA DA IMEL Aikace-aikace
SILIKE Si-TPV 3520- 60A wani nau'in elastomer ne mai thermoplastic wanda ba ya buƙatar plasticizer wanda aka ƙera don aikace-aikacen da ke buƙatar juriya mai ƙarfi da kuma ƙwarewar taɓawa mai laushi da siliki. Wannan kayan yana da sauƙin haɗawa da substrates kamar polycarbonate (PC), ABS, TPU, da sauran kayan polar, wanda hakan ya sa ya dace da akwatunan waya, madaurin hannu na agogon hannu, madauri, akwatunan lantarki masu ɗaukuwa, na'urori masu sawa, kayan wasanni, da kayan waje.
Haɗakar juriya mai ban mamaki tare da yanayin laushi mai daɗi, Si-TPV 3520-60A yana haɓaka kyawawan halaye da aiki na kayan lantarki na masu amfani, kayan sawa, da samfuran waje. Aiki mai ɗorewa da halayensa masu kyau suna tabbatar da sakamako mai inganci, yana biyan buƙatun kasuwannin lantarki da wasanni masu tasowa yayin da yake ba da ƙwarewar mai amfani mai kyau.
Muhimman Fa'idodi
- Jin laushi mai laushi
- Kyakkyawan juriya ga tabo, juriya ga ƙura da aka tara
- Ba tare da mannewa da mai mai tauri ba, babu ƙamshi
- Sauƙin cirewa, alamar ƙofar (walƙiya) mai sauƙin sarrafawa
- Haɗi mai kyau tare da ABS, PC
- Za a iya yin alamar Laser, buga allo, buga pad, feshi da sauran sarrafawa na biyu
Halaye
- Daidaituwa: TPU, PC, PMMA, PA
Al'adar Dabbobi
| Gwaji* | Kadara | Naúrar | Sakamako |
| ISO 868 | Tauri (daƙiƙa 15) | Bakin Teku A | 59 |
| ISO 1183 | Takamaiman Nauyi | 1.18 | |
| ISO 1133 | Ma'aunin Gudun Narkewa 2.16kg & 190℃ | g/minti 10 | 1.3 |
| ISO 37 | Modulus na elasticity (MOE) | MPa | 4.11 |
| ISO 37 | Ƙarfin Taurin Kai | MPa | 13.8 |
| ISO 37 | Damuwa Mai Tsanani @ 100% Tsawaita | MPa | 2.1 |
| ISO 37 | Ƙarawa a lokacin hutu | % | 962 |
| ISO 34 | Ƙarfin Yagewa | kN/m | 42.6 |
| ISO 815 | Saitin Matsawa awanni 22 @ 23℃ | % | 24 |
*ISO: Ƙungiyar Daidaita Daidaito ta Duniya
ASTM: Ƙungiyar Gwaji da Kayan Aiki ta Amurka
Yadda ake amfani da shi
● Jagorar Sarrafa Alluran Motsa Jiki
| Lokacin Busarwa | Awa 2-6 |
| Zafin Busarwa | 80-100℃ |
| Zafin Yankin Ciyarwa | 150-180℃ |
| Zafin Jiki na Tsakiyar Yankin | 160-180℃ |
| Zafin Jiki na Gaba | 160-180℃ |
| Zafin Bututun | 170-190℃ |
| Zafin Narkewa | 170℃ |
| Zafin Mold | 20-40℃ |
| Gudun Allura | Matsakaicin matsakaici |
Waɗannan yanayin tsari na iya bambanta da kayan aiki da hanyoyin aiki daban-daban.
● Sarrafawa na Biyu
A matsayin kayan thermoplastic, ana iya sarrafa kayan Si-TPV na biyu don samfuran yau da kullun
● Matsi na Gyaran Allura
Matsin riƙewa ya dogara ne da yanayin, kauri da wurin ƙofar samfurin. Ya kamata a saita matsin riƙewa zuwa ƙaramin ƙima da farko, sannan a hankali a ƙara har sai babu wata matsala da ta shafi hakan a cikin samfurin da aka yi wa allura. Saboda halayen roba na kayan, matsin riƙewa mai yawa na iya haifar da mummunan lalacewar ɓangaren ƙofar samfurin.
● Matsi na baya
Ana ba da shawarar cewa matsin lamba na baya lokacin da aka ja da baya ya kamata ya zama 0.7-1.4Mpa, wanda ba wai kawai zai tabbatar da daidaiton narkewar narkewa ba, har ma zai tabbatar da cewa kayan ba su lalace sosai ta hanyar yankewa. Saurin sukurori da aka ba da shawarar Si-TPV shine 100-150rpm don tabbatar da cikakken narkewa da plasticization na kayan ba tare da lalata kayan da dumamar yanke ke haifarwa ba.
Gargaɗi Game da Kulawa
Ana ba da shawarar na'urar busar da danshi mai bushewa don busarwa.
Ba a haɗa bayanan lafiyar samfura da ake buƙata don amfani mai aminci a cikin wannan takardar ba. Kafin a sarrafa, a karanta takaddun bayanai na samfura da aminci da kuma lakabin kwantena don amfani mai aminci bayanai game da haɗarin jiki da lafiya. Ana samun takardar bayanai game da aminci a gidan yanar gizon kamfanin silike a siliketech.com, ko daga mai rarrabawa, ko ta hanyar kiran sabis na abokin ciniki na Silike.
Rayuwa da Ajiya Mai Amfani
A kai shi a matsayin sinadarai marasa haɗari. A adana a wuri mai sanyi da iska mai kyau. Halayen asali za su kasance ba tare da wata matsala ba na tsawon watanni 24 daga ranar da aka samar, idan an ajiye shi a cikin wurin da aka ba da shawarar ajiya.
Bayanin Marufi
25KG / jaka, jakar takarda mai sana'a tare da jakar ciki ta PE.
Iyakoki
Ba a gwada wannan samfurin ba kuma ba a wakilta shi a matsayin wanda ya dace da amfani da shi na likita ko magunguna ba.
Bayanin Garanti Mai Iyaka - Da fatan a karanta a hankali
An bayar da bayanin da ke cikin wannan bayanin da gaskiya kuma ana kyautata zaton daidai ne. Duk da haka, saboda yanayi da hanyoyin amfani da kayayyakinmu sun fi ƙarfinmu, bai kamata a yi amfani da wannan bayanin a madadin gwaje-gwajen abokin ciniki don tabbatar da cewa kayayyakinmu suna da aminci, inganci, kuma cikakke ga amfanin da aka yi niyya. Ba za a ɗauki shawarwarin amfani a matsayin abin da zai sa a keta haƙƙin mallaka ba.
Maganin da ke da alaƙa?
-
Elastomer mara mannewa na Thermoplastic don Kayan Wasanni na Cikin Gida, Waje & Na Nishaɗi
Si-TPV don kayan wasanni da kayan wasanni fiye da kima zai ƙara "jin" da ya dace ga samfurinka. Waɗannan kayan masu kayatarwa suna magance matsalolinka mafi wahala kuma suna ba da damar ƙirƙirar ƙirar samfura don haɗa aminci, kyau, aikin samfura, a fannin daidaitawa, da kuma dacewa da muhalli.
-
Kayayyaki masu laushi, masu dacewa da fata don Kayayyakin Lantarki na 3C
Si-TPV elastomer ne mai laushi da laushi, wanda ba shi da phthalate, wanda ke ba da laushin taɓawa, juriya, da kuma dacewa da mold fiye da kima - wanda ya dace da kayan lantarki na 3C masu dorewa kamar akwatunan waya, madauri, da kayan da ake sawa.
-
Maganin Elastomer Mai Taushi na Overmold don Riƙewa Mai Dorewa da Kayan Aikin Hannun
Lokacin amfani da Si-TPV, ƙira da haɓaka maƙallan hannu don kayan aiki masu ƙarfi da marasa ƙarfi da samfuran hannu, ba wai kawai yana ƙara kyawun na'urar ba, yana ƙara launi ko laushi mai bambanci. Musamman ma, aikin Si-TPV mai sauƙi yana haɓaka ergonomics, yana rage girgiza, kuma yana inganta riƙewa da jin daɗin na'urar.
-
Si-TPV Soft-Touch Elastomer don Kayan Wasan Yara, Kayayyakin Dabbobi, da Saƙar Rufi
Idan aka kwatanta da PVC, mafi yawan TPU mai laushi, da TPE, Si-TPV ba ya ɗauke da robobi ko mai laushi. Mafita masu kyau a gare ku! kyau, masu dacewa da fata, muhalli, taɓawa mai laushi da aka yi wa ado da yawa, da sauƙin launi akan kayan wasa da kayayyakin masarufi. Kada ku ƙunshi wani abu mai haɗari yayin da kuke ba da ƙarfi mai ƙarfi daga juriya ga gogewa da tabo.
-
Maganin Elastomer Mai Taushi Mai Kyau ga Lafiyar Dan Adam da Yara
Madadin PVC da silicone ko robobi na gargajiya masu dacewa da muhalli -- Jerin Si-TPV, wanda ke ba masana'antun damar ƙirƙirar samfura na musamman, waɗanda suke da kyau a gani, a cikin kyau, kwanciyar hankali, ergonomic, da launuka masu haske, tunda ba tare da ƙaura ba, suna da saman da ba ya mannewa, don haka yana da juriya ga ƙwayoyin cuta, datti, da sauran gurɓatattun abubuwa fiye da sauran kayan. Wannan ya sa ya zama sabon mafita ga samfuran yara na uwaye da jarirai.
-
Barbashi Masu Taushi da Aka Gyara don Matte Fim da Fata
SILIKE's Soft TPU Modifier Barbashi suna haɗa juriya da sassauci, wanda hakan ya sa suka dace da amfani a cikin kayan wasanni kamar ƙwallon baseball, ƙwallon softball, da safar hannu ta golf, da kuma a cikin fina-finai da fata. Waɗannan barbashi suna inganta jin daɗin hannu ba tare da ɓatar da jin daɗi ko ƙwarewa ba, suna da laushi mai jure zamewa, wanda ba ya mannewa wanda ke haɓaka iko a cikin yanayin danshi ko santsi. Tare da ƙimar COF > 3, suna ba da riƙo mai kyau. Bugu da ƙari, suna aiki azaman ƙarin matte mai aiki ga TPU, suna inganta kyawun gani, yanayin saman, da juriya ba tare da buƙatar granulation ko hazo ba.
-
Masu Gyaran Si-TPV don Inganta Santsi da Dorewa a Fuskar TPE
Sabuwar hanya ce ga na'urorin lantarki masu amfani da thermoplastic. Si-TPV sabuwar na'ura ce ta gyaran TPE, wacce aka ƙera don inganta santsi a saman, jin tabo, da kuma juriya gaba ɗaya. Idan aka haɗa ta da TPE, Si-TPV yana ƙara juriyar kayan ga karce da gogewa, yayin da yake rage tauri ba tare da lalata halayen injiniya ba. Sakamakon shine saman da ke da laushi tare da juriyar tsufa mai kyau, juriyar rawaya, da juriyar tabo. Bugu da ƙari, Si-TPV yana ba da gudummawa ga ƙarewar saman matte, wanda hakan ya sa ya zama mafita mafi kyau ga masana'antu da ke buƙatar na'urorin lantarki masu aiki da inganci tare da fa'idodi na aiki da kyau.
-
Kirkire-kirkire a Kayan Kumfa na EVA: Si-TPV Mai Gyara don Inganta Aiki da Dorewa
An shigar da Si-TPV cikin kayan kumfa na EVA, kuma an yi amfani da fasahar kumfa mai sinadarai don shirya kayan kumfa na EVA tare da fa'idodin kariyar muhalli da cika launi. Idan aka kwatanta da OBC da sauran polyolefin elastomers, Si-TPV ya fi tasiri, kuma a lokaci guda yana iya inganta yanayin matsewa mai ƙarfi da ƙarancin zafin jiki na kayan kumfa na EVA, kuma ƙimar raguwar zafi na kayan kumfa na EVA ya ragu daga 1.5% zuwa 0.4%.
-
Mai Gyaran Si-TPV Polymer don Ingantaccen Dorewa & TPU Mai Taɓawa Mai Taɓawa a cikin Kebul ɗin Cajin EV da Tiyo
SILIKE Si-TPV 3100 Series wani elastomer ne mai ƙarfi wanda aka yi da silicone wanda ke aiki azaman ƙari na filastik da kuma mai gyara polymer don tsarin TPU. Yana haɓaka aikin TPU ta hanyar samar da juriya ga karce, juriyar gogewa, da kuma halayen da ba sa mannewa. Bugu da ƙari, yana inganta jin daɗin taɓawa mai laushi kuma yana ba da ƙarewa mai laushi, yana sa TPU ta fi dacewa da aikace-aikace kamar bututun shawa mai sassauƙa, sassan motoci, da kebul na caji na EV. Wannan mai gyara yana bawa masana'antun damar cimma kyawun gani da aiki, yana haɓaka juriya da kwanciyar hankali na kayan aiki masu sassauƙa.