Labarai - Si-TPV Kayan da aka yi amfani da shi wajen gyaran madaurin bas da kuma sakar da aka yi wa fenti

https://www.si-tpv.com/si-tpv-overmolding-of-tool-handles-redefines-ergonomics-boosting-safety-and-comfort-product/

Menene Matsalolin da Ke Faruwa da Rashin Aiki na Bus OMadauri na Verhead& Kayan Aikin Gyaran Rail?

Kayan gargajiya kamar su thermoplastic polyurethane (TPU), thermoplastic elastomers (TPE), Thermoplastic Vulcanizate (TPV), da thermoplastic roba (TPR) suna nuna sauƙin tsufa da kuma ci gaban dattin saman.
Bugu da ƙari, yawan hulɗa da hannu yana haɓaka mannewar ƙwayoyin cuta da yaduwar ƙwayoyin cuta a saman waɗannan kayan. Bugu da ƙari, ci gaba da gogayya da ƙarfin waje na iya haifar da wargajewar layin molding mai yawa. Waɗannan ƙalubalen suna da matuƙar lalata amincin fasinjoji da ingancin aiki, wanda hakan ke sa kayan gargajiya ba su dace da buƙatun tsarin bas na zamani ba dangane da dorewa, tsafta, da jin daɗi.

Dalilin da yasa Kayan Gyaran Gaggawa na Gargajiya Suka Kasance a Bas Handrailda kuma Handle?

Na Gargajiyakayan da suka wuce gona da iriAna amfani da su wajen rage ƙarfin iskar shaka da kuma ƙarfin da ke cikin saman. Fuskokinsu na hydrophilic ba su da juriya ga tabo da kuma ƙwayoyin cuta kuma za su iya sha ruwan jiki da ƙananan halittu cikin sauƙi. Bugu da ƙari, don samun jin daɗin taɓawa mai laushi, kayan gargajiya na molding za su haɗa da robobi masu yawa, waɗanda ke da saurin ƙaura zuwa waje su haifar da mannewa. Waɗannan matsalolin za su iya haifar da:

Lalacewar Taɓawa: A lokacin da ake amfani da shi daga baya, saman zai bare, kuma saman kayan da ke cike da gyale zai yi kama da busasshe/mai kauri ko mai, wanda hakan zai haifar da mummunan yanayin tafiya.

Rashin Juriyar Sakawa: Saboda yawan gogayya da kayan gargajiya ke yi da kuma amfani da su na tsawon lokaci, lalacewar laushi zai yi sauri. Wannan zai sa saman molding ɗin ya yi laushi. Haɗarin tsaro zai iya faruwa cikin sauƙi idan fasinjoji suka yi gumi ko jikewa a hannunsu yayin da suke cikin bas.

Shigowar na'urar tace filastik: Ƙarin abubuwa masu ɗauke da sinadarin phthalate za su yi ƙaura zuwa saman, suna shafar lafiyar fasinjoji, suna haifar da rashin lafiyan jiki, da kuma katsewar tsarin endocrine.

Yaɗuwar ƙwayoyin cuta: Ƙarfin da ke cikin saman zai sa saman ruwa ya sha ruwa da ƙwayoyin cuta cikin sauƙi. Rashin juriya ga tabo da kuma abubuwan da ke kashe ƙwayoyin cuta zai iya haifar da haɗarin lafiya da tsafta.

Si-TPV,Elastomer Mai Tushen Silikon Vulcanizate Thermoplastic,isrobar silicone mai kyau da aka watsa a cikin matrix na TPU ta hanyar fasahar vulcanization ta musamman, tana magance matsalolin masana'antar daidai!

Muhimman Fa'idodin Si-TPV ga BasMadaurin Sama,Riƙon RiƙoAikace-aikace:

1. Jin daɗin fata mai ɗorewa: Ƙwayoyin roba na silicone da suka ɗaga a saman suna ba da taɓawa mai ɗorewa da kwanciyar hankali ga fata, kuma suna iya dawwama da santsi ba tare da buƙatar ƙarin magani a saman ba.

2. Juriyar lalacewa sosai: Barbashin robar silicone da aka yi da vulcanized suna warwatse ko'ina a saman TPU kuma suna samar da tsari mai jure lalacewa sosai, wanda yake da ƙarfi sosai don riƙewa na dogon lokaci.

3.Maganin ƙwayoyin cuta, juriya ga tabo, kuma mai sauƙin tsaftacewa:Elastomer mara mannewa yana da babban kusurwar hulɗa da ruwa (99°-115°), ƙarancin kuzarin saman, da kuma kyakkyawan yanayin hydrophobic, wanda ke sa shi ya jure mannewa ga ƙwayoyin cuta da tabo, kuma ana iya tsaftace shi cikin sauƙi da barasa.

4. Yana da kyau ga muhalli kuma yana da lafiya: babu na'urar plasticizer, ƙarancin VOCs.

5. Sauƙin tsari: Ya dace da hanyoyin gyaran fuska da yawa kamar gyaran allura da fitar da iska mai ƙarfi tare da babban dawowa. Elastomer da aka yi da Siliconeba phthalate baelastomer mai amfani da thermoplasticwanda ke nunakyakkyawan ruwa, kyakkyawan aiki mai laushi na overmolding, da kuma ƙarfin haɗin gwiwa tare da polypropylene (PP), PC/ABS, wanda hakan ke sa ya zama da sauƙin yin walƙiya.

6. Rage gurɓataccen iskar carbon: Kayan da aka yi da silicon, madadin robobi masu tushen carbon (PVC, TPU...), 100% ana iya sake amfani da su.

Sabbin Dabaru a cikin Elastomer na Thermoplastic: Ci gaba da manufar kore ta hanyar Fasaha Mai Dorewa, Mai Taɓawa Mai Laushi

SILIKE,nakathermoplasticƙera vulcanizate,yana ba da kayan elastomeric masu laushi masu ɗorewa waɗanda ke da sauƙin amfani da fata - Si-TPV.na zamanisiliconeTPV don yin gyaran fuska fiye da kimaabuyana ƙarfafawamasana'antun kayan aikin bas da sufuri don cika buƙatun zamani na jin daɗi, aminci, da alhakin muhalli.

Kore, mai kyau ga muhalli, mai sake yin amfani da shi,
Yana kiyaye taɓawa mai karko a cikin yanayin -20℃ zuwa 45℃.

A ƙarƙashin yanayin danshi, riƙon zai fi kayan gargajiya na overmolding kyau.

Ana iya kawar da kashi 99.9% na ƙwayoyin cuta a saman fata ta hanyar goge su da barasa kawai.

Si-TPV, wannanna zamanibabu filastikyawan ƙeramafita haɗaFa'idodin thermoplastic elastomers da silicone, suna da kyakkyawan taɓawa da juriya, kuma sun dace sosai don yin molding fiye da kima, saman taɓawa mai laushi, da haɓaka juriyar sawa a ƙirar madaurin bas. Mafita ce mai kyau ga kerawa mai ƙarfin hali!

Contact Amy Wang at amy.wang@silike.cn or visit www.si-tpv.comdon ƙarin koyo game damai dacewa da muhalli kayan riƙe mota, ribobi masu laushi, riƙo, da kayan yanar gizo masu rufi.

Gano yadda Si-TPV ke taimakawa wajen ƙirƙirar madadin aminci, dorewa, da taushi ga madauri da madauri na zamani na sufuri.

Lokacin Saƙo: Yuli-18-2025